This 24-Volt battery charger / status monitor connects directly to an aircraft / military battery. Float and auto shut-off modes can be set for Lead Acid or Nicad batteries. Monitors Battery voltage increasing shelf life.
Unit can work as a “Status Monitor” after a battery has been properly serviced by approved FAA Repair Station. The battery can be placed in storage with the Activator 282 installed on main connector. The Activator 282 will provide constant monitoring by pulsing the battery and provide a visual indicator of Green, Yellow or Red indicator of battery status.
The Activator 282 performing status monitoring is not consider maintenance as it does not change the level maintenance of the battery.
Automatic operation High Amp pulse Complete conditioning restoration & recharge Average 3 hours to complete Temerature monitors battery temp and shuts down incase of an overheat when temp plate is used Can rejuvinate a completely flat zero volt battery in most cases
Quick connect , Cable connection and Fully automatic charger for 24 volt Batteries
The Activator 282U is a direct connect, fully automatic 2 Amp charger capable of charging a 24 volt military or aviation battery of any rating from zero to full capacity. It is also a standby maintenance unit without the use of “trickle” charging, thus extending the life and durability of the battery. There is no gassing, heat or other detrimental results of trickle or float charge. The digital voltmeter continuously displays battery voltage during charge and standby.